Products

Manual Positioning & Optomechanics

MANUAL POSITIONING SYSTEMS

OWIS positioning systems are the economic solution for applications, where simple but precise motion sequences have to be realized. Due to the manifold combination possibilities of linear, rotary, angular adjustment and tilt stages, goniometers as well as fine-thread and micrometer screws in the most different specifications, a large application area is covered. Adapter plates allow additional assembling possibilities. Therefore, a multitude of applications is possible, also beyond the standardized system heights of 25 mm (SYS 25), 40 mm (SYS 40), 65 mm (SYS 65) and 105 mm (SYS 90).

OPTICAL COMPONENTS

OWIS optical components are used in all research fields of the industrial sectors where light is used for experimental and developing processes. These are not only standard but also customer and application-specific products. The kinematic and gimbal adjustment units with the corresponding inserts are brought to the required beam handling heights, when mounted on slides, pins or directly on optical tables. In addition to the standardized system heights of 25 mm (SYS 25), 40 mm (SYS 40), 65 mm (SYS 65) and 105 mm (SYS 90), a variety of applications can be realized, due to the location diameters of 9.5 mm / 3/8 " to 152.4 mm/6".

For detailed datasheets, please refer to OWIS website: http://www.owis.eu/en/products/manual-positioning-systems/